LIAOCHENG KETAI LASER
24-hour hotline:400-0635-060
Contact:Qu jing li
Landline:0635-8380323
Phone:13563000323 15969601880
Website:en.ketailaser.com
Address:liao cheng jia ming lu 33 hao |
|
|
Ke tai sharing: wooden materials, laser engraving machine carving |
| Source:Liaocheng Thai laser equipment co., LTD Time:
2018/12/13 11:57:21
[Return] |
 |
Brief：Wood is by far the most commonly used laser machining material, engraving and cutting easily. |
Wood is by far the most commonly used laser machining material, engraving and cutting easily. Light color wood like birch, cherry wood or maple is easy to laser gasification, which is suitable for sculpture. Each wood panels production has its own characteristics, some dense some, such as hardwood, while carving or cutting with laser power. We recommend not familiar carving wood, carved features to study first.
Wood cutting
The depth of the laser engraving machine cutting wood is generally not deep, maximum cutting depth depends on wooden materials and laser power, such as cutting thick wood, can be cut a little slower, but may cause burning of wood. Specific operations can try to use large size lenses, and adopt the method of repeated cutting.
Wood carving
On the wood carving, in general, is usually a Yin carving, engraving depth is deeper. Such power generally set high, if encounter a hard wood may make after carving graphics color becomes darker. If you want to make the color shallow some, can increase the speed of engraving, tried to carve a few times more. In some wood carving will produce some lampblack is attached to the surface of wood, if the wood has brush paint can it carefully wipe wet cloth, if you do not go up lacquer might not clean, cause product surface soiled. |
Previous: Ke tai is introduced: the influence factors of laser cutting quality
Next: Laser cutting machine lens cleaning problems need attention |
Related news:
|
Sweep,friends 
